 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Low Capacitance ESD Protection for High-Speed Serial Interfaces CM1263-06DE Features * * * * * 6 channels of ESD Protection 1pF loading capacitance per channel typical 8kV ESD protection (IEC 61000-4-2, contact discharge) 15kV ESD protection (IEC 61000-4-2, air discharge) RoHS-compliant uDFN-12 package Applications * LCD and Camera data lines in wireless handsets that use high-speed serial interfaces such as MDDI, MIPI, MVI and MPL I/O port protection for mobile handsets, notebook computers, PDAs etc. Wireless handsets Handheld PCs/PDAs LCD and camera modules * * * * CH6 VP1 CH5 CH4 VP2 CH3 CH1 VN CH2 VN VN VN (c)2010 SCILLC. All rights reserved. April 2010 - Rev. 3 Publication Order Number: CM1263-06DE/D CM1263-06DE PIN DESCRIPTIONS Pin 1 2 3 4 5 6 DESCRIPTION VN* (CH1) ESD Channel #1 VN* VN* (CH2) ESD Channel #2 VN* Pin 7 8 9 10 11 12 DAP* DESCRIPTION (CH3) ESD Channel #3 VP2 for Channels 2, 3, and 4 (CH4) ESD Channel #4 (CH5) ESD Channel #5 VP1 for Channels1, 5, and 6 (CH6) ESD Channel #6 Backside, GND Pad, VN* Note 1: * To achieve best ESD performance, all VN pins must be connected. Rev.3 | Page 2 of 7 | www.onsemi.com CM1263-06DE Ordering Information PART NUMBERING INFORMATION PIN 12 PACKAGE uDFN LEAD-FREE FINISH CM1263-06DE Part Marking JK12 Note 1: Parts are shipped in Tape and Reel form unless otherwise specified. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER Operating Supply Voltage (VP - VN) Operating Temperature Range Storage Temperature Range DC Voltage at any channel input RATING 6.0 -40 to +85 -65 to +150 (VN - 0.5) to (VP + 0.5) UNITS V C C V Rev. 2 | Page 3 of 7| www.onsemi.com CM1263-06DE ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1) SYMBOL PARAMETER VP IP VF Operating Supply Voltage (VP-VN) Operating Supply Current Diode Forward Voltage Top Diode Bottom Diode Channel Leakage Current VP=3.3V, VN=0V (per VP pin) TA=25 IF = 8mA; VP=3.3V, VN=0V C; 0.60 0.60 TA=25 VP=3.3V, VN=0V (Channel 1) C; 0.80 0.80 0.95 0.95 250 V V nA CONDITIONS MIN TYP 3.3 MAX 5.5 8.0 UNITS V A ILEAK VP=3.3V, VN=0V (Channels 1-6); IR CIN Reverse (Leakage Current) Channel Input Capacitance VP=floating; VN=0V (per channel) At 1 MHz, VP=3.3V, VN=0V, VIN=0V 0.88 1000 1000 1.2 nA nA pF CIN Channel Input Capacitance Matching Mutual Capacitance between signal pin and adjacent signal pin ESD Protection Peak Discharge Voltage at any channel input, in system a) Contact discharge per IEC 61000-4-2 standard b) Air discharge per IEC 61000-4-2 standard Channel Clamp Voltage Positive Transients Negative Transients Dynamic Resistance Positive Transients Negative Transients At 1 MHz, VP=3.3V, VN=0V, VIN=0V 0.02 pF CMUTUAL At 1 MHz, VP=3.3V, VN=0V, VIN=0V 0.11 pF VESD Notes 2 and 3; TA=25 C 8 15 kV kV VCL TA=25 IPP = 1A, tP = 8/20S; C, Notes 3 +9.96 -1.6 V V RDYN TA=25 IPP = 1A, tP = 8/20S C, Any I/O pin to Ground; Note 3 0.96 0.5 Note 1: All parameters specified at TA = -40 to +85uC unless otherwise noted. C Note 2: Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330, VP = 3.3V, VN grounded. Note 3: These measurements performed with no external capacitor on VP (VP floating). Rev.3 | Page 4 of 7 | www.onsemi.com CM1263-06DE Mechanical Details uDFN-12 Mechanical Specifications, 0.4mm Dimensions for the 12-lead, 0.4mm pitch uDFN pack- age are presented below. PACKAGE DIMENSIONS Package JEDEC No. Leads Dim. Min A A1 A3 b D D2 E E2 e K L # per tape and reel 0.15 0.15 2.40 1.90 1.25 0.30 0.45 0.00 Millimeters Nom 0.50 0.02 0.127 REF 0.20 2.50 2.00 1.35 0.40 0.40 BSC 0.22 REF 0.25 0.35 0.25 2.60 2.10 1.45 0.50 Max 0.55 0.05 Min 0.018 0.000 uDFN MO-229C * 12 Inches Nom 0.020 0.001 Max 0.022 0.002 0.005 REF 0.006 0.094 0.075 0.049 0.012 0.008 0.098 0.079 0.053 0.016 0.010 0.102 0.083 0.057 0.020 0.016 BSC 0.0087 REF 0.006 0.010 0.014 3000 pieces Dimensions for 12-Lead, 0.4mm Pitch uDFN Package Controlling dimension: millimeters * This package is compliant with JEDEC standard MO-229C with the exception of the D, D2, E, E2, K and L dimensions as called out in the table above. Rev. 2 | Page 5 of 7| www.onsemi.com CM1263-06DE Tape and Reel Specifications PACKAGE SIZE (mm) 2.50 X 1.35 X 0.50 POCKET SIZE (mm) B0 X A0 X K0 2.75 X 1.60 X 0.60 TAPE WIDTH W 8mm REEL DIAMETER 178mm (7") QTY PER REEL 3000 PART NUMBER CM1263-06DE P0 4mm P1 4mm Rev.3 | Page 6 of 7 | www.onsemi.com CM1263-06DE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: FULFILLMENT Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: Phone 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: Fax 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: Email orderlit@onsemi.com N. American Technical Support: 800-282-9855 Support Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative Rev. 2 | Page 7 of 7| www.onsemi.com |
Price & Availability of CM1263-06DE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |